Industrial Process Gas

Typically, a basic R&O oil of proper viscosity is all that is required as a lubricant. Direct injection lubrication has proven to be a key to successful operation, resulting in excellent corrosion resistance, blade and bearing life. Ro-Flo’s lube system does not require expensive “compressor” oils. The lube oil that is injected into the compressor is typically coalesced and removed from the process downstream.

Ask Us About Our Corrosive Gas Solutions

Ideal for Difficult Streams

Ro-Flo’s pass through lube system has successfully handled gas streams containing butanes, propanes, butadienes, and toluenes. Latex and rubber producers, for example, handle butadiene variants, and Ro-Flo’s compress that toxic gas without difficulty. The optional double bellows seal, with positive pressurization, is often chosen as an extra measure of protection when handling toxic/lethal streams.

If you have a gas worse than the applications below, Ro-Flo’s pass through lube system can handle it:

  • Butadine
  • Propylene
  • Propylene Oxide
  • Monomer Recovery
  • Hydrogen Recovery
  • Tire Gasification
  • H2S
  • Cyclohexane
  • Carbon Dioxide
  • Acid Gas
  • Coke Oven Gas
  • Benzene
  • Toluene
  • Acetone
  • Dimethyl Ether
  • Ethylene Trioxide
  • Carbon Monoxide
  • Heavy Hydrocarbons
  • Water Saturated Streams